1)Open Type machine laser 2000w all in one XTC-F1530H
2)Applications primarily suited for cutting stainless, carbon, aluminum, titanium, and most non-ferrous metals
3)Fiber laser power source options from 1000W to 3000W
4)Fiber offers reduced maintenance requirements and operating costs compared to CO2
5)Japanese servo motors & drivers
6)Drive system X-axis ball screw drive, Y-axis square rail with rack and pinion gear
7)Working voltage: 380V, 50Hz /60Hz
Whats' the Main feature of fiber laser cutting system?
1. High performance.fiber transmission can make sure the same quality cutting effect in every point of the material.
2. High efficiency,fast cutting speed.photoelectric conversion rate about 35%.
3.Low gas consumption.it has the cutting technology specially for steel board and produce no gas when cutting .
4.Low power consumption
5.Stability and reliability of light path system and control system.
6.Imported original fiber lasers,high and stable,lifespan is over 100000 hours.
7.Higher cutting quality and efficiency,cutting speed is up to 60 m/min.
8.High performance germane reducer,gear and rack;Japanese guide and ball screw.
Stability and fast speed are the characteristics of fiber laser cutting machines. With this feature, laser cutting machines are recognized by many people. Fiber laser cutting machines belong to the category of cutting machines. There are also different types of cutting machines. The price of laser cutting machines is All kinds of cutting machines have their own characteristics, which are analyzed in detail below.
Fiber laser cutting machine belongs to the processing category of metal laser cutting machine, so it can only cut metal, not non-metal such as cloth, leather, stone, etc. The reason is simple. The wavelength range of fiber laser cutting machine is not within the absorption range of the above materials. Or the absorption is not good enough to achieve the ideal cutting pattern.
Secondly, fiber laser cutting machine is not recommended for long-term cutting of aluminum, copper and other metal materials, because these materials are highly reflective materials (Note: high reflectiveness has little to do with the smoothness of the cutting surface of the plate. Laser cutting machines are mainly due to laser The wavelength is not within the ideal absorption range of these materials, most of the energy is reflected back, and it is easy to damage the protective lens in front of the laser head. If it is not used for a long time, it will increase the consumption of consumables.